American Air and Water Ultraviolet Air Cleaners and UV Water Purifiers

Web Design by

Portable Germicidal Units

Model RM 9U 105 shown.
This portable one bulb air sterilization unit covers up to 200 square feet. The light is directed so the room can be occupied.

Features:
- Internal Air Filter
- Sterilizes air in rooms up to 200 sq. ft.
- High intensity 9-watt germicidal lamp
- Light weight – 8 lbs
- Compact unit – 5½” x 9½” x 7¼”
- Variable speed fan 10 –100 cfm
- 120 volts, 60 hertz, 1.02 amps

Provides clean environment by reducing airborne and surface bacteria, viruses and spores. It is recommended a lamp replacement annually – effective lamp life 8,000 hours. Filter should be replaced as needed, at least every 2 years.

Replacement Parts List:

Description	Part #	Price
Fan Cord	FAN055	$4.00
Filter	GLT065	$36.00
Front Grill	CHEV101	$15.00
Fuse	FUS5AMP	$10.00
Handle	MSC045	$5.00
Lamp Holder	LDH110	$5.00
On/Off Switch	SWT TOGGLE	$8.00
Power Cord	GRD005	$7.00
Rear Fan Guard	FAN020	$6.00
Rear Fan	FAN75	$75.00
Rubber Feet	MSC065	$3.00
Transformer	TXG231	$45.00
UV Germicidal Lamp	GML370	$78.00
Variable Blower Switch	FANMTRCTRL	$38.00

The lamp is packaged separately to prevent breakage. Do not plug into outlet until lamp is installed. To install lamp:
1) Remove four larger screws – two from each side of top panel with Philips screwdriver.
2) Lift with handle and set aside
3) Clean lamp with lint free cloth and alcohol or water. Do not touch the glass with bare hands!
4) Insert lamp base into white socket in base. Secure matching bi-pins – Do not force!
5) Make sure the safety switch in the back clicks when pushed downward.
6) Check wiring connections to ensure shipping has not loosened any connections.
7) Reinstall the cover with four screws.
8) Plug unit into standard 110/120 volt, 60Hz outlet (220 volt, 50Hz – if specified).
9) Put the toggle switch to “ON” to power the lamp
10) Position the knob on front to desired fan speed.

Back